Ode to the Long-forgotten Deck Cleat

0

The devastating train of hurricanes that rolled through Florida in 2004 and 2005 gave engineers an opportunity to see firsthand what happens when a modern boats mooring points and lines are pushed to their limits.

Ode to the Long-forgotten Deck Cleat

Photos by Ralph Naranjo

A post-mortem look at many lost boats revealed shocking design and construction oversights that contributed to the carnage. Buttonhole-size chocks made it impossible to add chafe gear. Sharp turns at chocks and hawseholes sawed lines until they broke. Tiny, poorly installed cleats yanked free from soggy, cored decks. Cheap cast aluminum cleats riddled with air pockets simply snapped.

This months look at the cleats found on todays production boats
revealed a disturbing trend: A fashion-conscious quest for aesthetic appeal is displacing function as a priority. The trend isn’t new, nor is it just reserved to cleats. In fact, I could easily point to any number of features on boats past and present that don’t make a lick of sense once the boat leaves a dock.

My pet peeve: huge cabin windows and poorly reinforced coachroofs. Sure the view is nice at the anchorage . . . but it loses its appeal when the green water comes rushing through a gaping hole after a knockdown.

Ode to the Long-forgotten Deck Cleat

Obviously, not every boat is intended to cross an ocean nor to carry weeks worth of food and supplies, so I can forgive a builder whose weekender is short a sea berth, or who sacrifices storage space for an air-conditioner compressor. These days, Im more surprised than not to see a truly impressive voyager at a boat show.

But the degree to which the pursuit of a pretty, “marketable,” boat is changing one of the most essential pieces of deck hardware shocked even me. Whether that boat is a trailerable daysailer or a cape-rounding voyager, it must at some time be anchored, moored, or tied to a dock. A boat needs cleats and those cleats need to be large, well-placed, and adequately reinforced. Its that simple.

Ode to the Long-forgotten Deck Cleat

When I first read Technical Editor Ralph Naranjos cleat report, I had a hard time believing that this was the state of the boatbuilding industry today. Was it really that bad? Was the rugged, elegant, and dead-simple Herreshoff four-bolt cleat (above left) bound for extinction? Only when I started reviewing Ralphs photos of boats secured at last years U.S. Boat Show in Annapolis, Md., did I really begin to worry.

Not only were good cleats in short supply, so were-sadly-people who knew how to use them. Lets hope it wont take another killer storm season to jog their memories.

Also with this article...
Darrell Nicholson
Practical Sailor has been independently testing and reporting on sailboats and sailing gear for more than 50 years. Its independent tests are carried out by experienced sailors and marine industry professionals dedicated to providing objective evaluation and reporting about boats, gear, and the skills required to cross oceans. Practical Sailor is edited by Darrell Nicholson, a long-time liveaboard sailor and trans-Pacific cruiser who has been director of Belvoir Media Group's marine division since 2005. He holds a U.S. Coast Guard 100-ton Master license, has logged tens of thousands of miles in three oceans, and has skippered everything from pilot boats to day charter cats. His weekly blog Inside Practical Sailor offers an inside look at current research and gear tests at Practical Sailor, while his award-winning column,"Rhumb Lines," tracks boating trends and reflects upon the sailing life. He sails a Sparkman & Stephens-designed Yankee 30 out of St. Petersburg, Florida. You can reach him at darrellnicholson.com.