Measure, Cut, Glue and Repeat

By
Darrell Nicholson
-
Published: Updated:
0

Generally, a deep locker will have a recessed lid. Some modification may be needed to fit locker bags.

Measure, Cut, Glue and Repeat
1. The frame is set for gluing. Wax paper keeps it from sticking to the work bench.
Measure, Cut, Glue and Repeat
2. The storage bags is bedded with polyurethane adhesive and then screwed down snugly.
Measure, Cut, Glue and Repeat
3. Fiberglass frames have slim corners.
Measure, Cut, Glue and Repeat
4. A hole saw helps round corners.
Measure, Cut, Glue and Repeat
5. Screws clamp the fabric between the top and bottom frame.

Darrell Nicholson
Darrell Nicholson
Practical Sailor has been independently testing and reporting on sailboats and sailing gear for more than 50 years. Its independent tests are carried out by experienced sailors and marine industry professionals dedicated to providing objective evaluation and reporting about boats, gear, and the skills required to cross oceans. Practical Sailor is edited by Darrell Nicholson, a long-time liveaboard sailor and trans-Pacific cruiser who has been director of Belvoir Media Group's marine division since 2005. He holds a U.S. Coast Guard 100-ton Master license, has logged tens of thousands of miles in three oceans, and has skippered everything from pilot boats to day charter cats. His weekly blog Inside Practical Sailor offers an inside look at current research and gear tests at Practical Sailor, while his award-winning column,"Rhumb Lines," tracks boating trends and reflects upon the sailing life. He sails a Sparkman & Stephens-designed Yankee 30 out of St. Petersburg, Florida. You can reach him at darrellnicholson.com.

RELATED ARTICLESMORE FROM AUTHOR