The stick products are stiffer than the tub products. As a result, they are harder to mix and slightly more difficult to get a good bond, but they are superior for stopping an active leak. The tested stick products permanently stopped the 1/8-inch saw cut leak within moments, while none of the tub products held for more than a few minutes.
- Sudbury Wet or Dry Epoxy blows out (top), but JB WaterWeld holds tight.
- Products packaged in tubs bond well but lack the stiffness to stay put under pressure..
- Fiberglass samples were soaked for several weeks before bonding.
- This Star brite sample undergoes shear testing. The epoxies were allowed to cure for 48 hours before shear testing.
- Testers apply pressure to wet fiberglass bonded with Total Boat Underwater Epoxy. Lapping over screw holes creates a mechanical hook.