Where Credit is Due: February 2011

Metz AntennaTipke ManufacturingProMarinerFacet/PurolatorHarkenStandard Horizon

0
Metz masthead antenna

My Catalina 270 sailboat has been equipped with a Metz masthead antenna for years. Upon decommissioning this fall I noticed that there was significant deterioration of the white UV cover at the base of the unit to the point where it had already chipped away. I e-mailed Metz Communications (www.metzcommunication.com) and asked whether it would affect functionality and, if so, could it be repaired. Within 24 hours, I received a reply from Lee at Metz who said that the antenna had a lifetime warranty and that I should return it for a replacement.

I packed up my old antenna, mailed it to them, and before a week had elapsed I received a brand-new Metz Manta 6 antenna—total cost about $7 for postage. Kudos to Metz for backing their product and their representative, Lee, for his prompt service!

 

Eric Burkert
Catalina 270
East Hampton, N.Y.

I’d like to commend Tipke Manufacturing (www.tipkemfg.com) for their help locating a part for my Fold-it Dock Buggy. I really like the buggy and was very put out when the hub holding a wheel came off and was lost overboard. I e-mailed an inquiry to them to see whether the part could be replaced. They sent the parts necessary to fix the axle at no charge, even though the buggy was out of warranty. (It’s about 4 years old.) My hat is off to a superb American manufacturer!

William Bozeman
Second Wind
Via e-mail

Recently, I had to move my ProMariner ProTruSine 400 Inverter to access another project, and I inadvertently pulled the remote fitting from the unit while “disconnecting” the remote control wire. I called Ian Goodnow at ProMariner (www.pmariner.com) and explained my problem. He remembered speaking with me about the install previously and suggested I pack up the whole unit and send it to them. Within a week, a new unit arrived free of charge, including shipping. Now that’s customer service!

 

Clark Broadbent
Euphoria, Catalina 30TR
New Haven, Conn.

I purchased a Facet/Purolator replacement lift pump from a local marine service store in Annapolis that turned out to be the wrong model for my engine. Two months after I returned the pump, the Annapolis store still had not refunded my $235, nor sent the pump to the factory. Upon e-mailing Facet/Purolator (www.facet-purolator.com), I received a prompt call from National Sales Manager Paul Puleo, and he later called the Annapolis store directly, on my behalf, encouraging speedy resolution. Keep in mind Facet/Purolator was under no warranty obligation since the Annapolis store was not an authorized distributor. Thanks to Paul and Facet/Purolator for going well beyond the norm of customer service.

Chip & Pam Lohman
Whispering Swan
Quantico, Va.

We were cruising by Montserrat when the Soufriere volcano exploded. Within minutes, we had 1 to 3 inches of rock and ash on every square inch or our PDQ catamaran, and visibility went from unlimited to several hundred feet. The cleanup effort took weeks!

Our Harken winches, which then sounded like pepper grinders, required a detailed cleaning. During the cleaning process, I noticed a casting crack on the stem cap of one of our 7-year-old Harken 48 winches. I contacted Neil Harvey, Harken Caribbean Sales Manager, concerning the casting crack. Within a week, a free replacement part was in my hand. No hassle or proof-of-purchase was required. I’m a Harken customer for life.

Jason Trautz
Yolo, PDQ
Via e-mail

I purchased a Standard Horizon chartplotter through a local dealer in Sidney, B.C. The after-market mounting systems just didn’t meet my cockpit requirements, so I decided to construct my own mount using ABS plastic. During construction, I accidentally dripped plastic solvent onto the front of the plotter, causing the plastic to melt. I hadn’t even used the unit yet in the real world!

I contacted Vertex Standard in Cypress, Calif., for advice; the helpful technician suggested I send the unit in for evaluation. Imagine my surprise when the unit was returned in short order with a brand new front cover trim at no cost! Kudos to Standard Horizon for supporting their units well above warranty requirements!

Bert Vermeer
Sidney, British Columbia

Darrell Nicholson
Practical Sailor has been independently testing and reporting on sailboats and sailing gear for more than 50 years. Its independent tests are carried out by experienced sailors and marine industry professionals dedicated to providing objective evaluation and reporting about boats, gear, and the skills required to cross oceans. Practical Sailor is edited by Darrell Nicholson, a long-time liveaboard sailor and trans-Pacific cruiser who has been director of Belvoir Media Group's marine division since 2005. He holds a U.S. Coast Guard 100-ton Master license, has logged tens of thousands of miles in three oceans, and has skippered everything from pilot boats to day charter cats. His weekly blog Inside Practical Sailor offers an inside look at current research and gear tests at Practical Sailor, while his award-winning column,"Rhumb Lines," tracks boating trends and reflects upon the sailing life. He sails a Sparkman & Stephens-designed Yankee 30 out of St. Petersburg, Florida. You can reach him at darrellnicholson.com.