Mastering Precision Drilling: How to Use Drill Guides

Learn how to tackle the finicky business of drilling a straight hole through a round, slippery surface with the help of a drill guide.

By
Drew Frye
-
Published:
0
A V-Guide in use on stainless pulpit railing. V-Guides keep your drill bit from walking off either side of the curved surface. They are a helpful tool in this scenario since stainless requires steady, slow, lubricated pressure to drill properly.
A V-Guide in use on stainless pulpit railing. V-Guides keep your drill bit from walking off either side of the curved surface. They are a helpful tool in this scenario since stainless requires steady, slow, lubricated pressure to drill properly. (Photo/ Drew Frye)

Poking a ⅜-in. bit into wood is simple enough. Place the bit on the mark, sight the drill from two directions at 90 degrees to make sure it is straight, and drill away. A hole in flat metal plate is simple enough, with the added step of center punching the mark to discourage the bit from wandering. The center bit of a hole saw will guide it true. But there are trickier cases, where the drill wants to wander everywhere but where you want it. They all have simple solutions.

To continue reading this article or issue you must be a paid subscriber.
Mastering Precision Drilling: How to Use Drill Guides
Subscribe

Subscribe to Practical Sailor

Get the next year of Practical Sailor for just $34. And access all of our online content - over 4,000 articles - free of charge.
Subscribe today and save 42%. It's like getting 5 months FREE!
Already Subscribed?
| Forgot your password? | Activate Web Access
Drew Frye
Drew Frye
Drew Frye, Practical Sailor’s technical editor, has used his background in chemistry and engineering to help guide Practical Sailor toward some of the most important topics covered during the past 10 years. His in-depth reporting on everything from anchors to safety tethers to fuel additives have netted multiple awards from Boating Writers International. With more than three decades of experience as a refinery engineer and a sailor, he has a knack for discovering money-saving “home-brew” products or “hacks” that make boating affordable for almost anyone. He has conducted dozens of tests for Practical Sailor and published over 200 articles on sailing equipment. His rigorous testing has prompted the improvement and introduction of several marine products that might not exist without his input. His book “Rigging Modern Anchors” has won wide praise for introducing the use of modern materials and novel techniques to solve an array of anchoring challenges. 

RELATED ARTICLESMORE FROM AUTHOR