The Perils of Fantastic Plastics

Durability suffers in the pursuit of new lightweight designs.

0

This month’s Gear Graveyard called to mind the famous scene in the movie The Graduate when actor Dustin Hoffman is pulled aside at a dinner party and offered a word of advice: “I just want to say one word to you son . . . just one word . . . plastics.”

The Perils of Fantastic Plastics

288

There are a myriad of polymer combinations that make up the vast realm we call plastics, so to speak of them in a general sense can be misleading. Some plastics, like the glass-fiber reinforced acetal copolymers used in a variety of marine hardware are extremely strong. But even the strongest plastics can be weakened by environmental factors. Our online article “Plastics Versus the Weather: The Nature of a Losing Battle” found in the Tools and Techniques section of our website at www.practical-sailor.com, describes some of the common enemies of plastics These include acids (from acid rain), water, sunlight, and ozone, which can occur when car exhaust mixes with sunlight.

This month’s Gear Graveyard looks at two products that have fallen victim to one of plastic’s most familiar shortcomings: poor tensile strength.

Johnson Inlet Strainer
with Quick Release
Fitting
: We received the Johnson Pump Protector Inlet Strainer along with some electric heads that we are testing for an upcoming article. The connector fitting used to join the barbed end fitting and the filter are relatively new to marine

The Perils of Fantastic Plastics

288

plumbing and have been gradually penetrating the market. Using O-ring seals and a sliding locking mechanism, they make it easy to connect and disconnect hoses. The plastic slide-lock component on the Johnson filter has an extremely thin section. One of the slides broke at this spot during a video shoot demonstrating how they functioned. Such quick-release fittings are a boon for installers and boatbuilders, but they should be designed to stand up to hard use. Until then, cruisers are better served with AISI-rated 316 grade all-stainless steel hose clamps.

No-Name Outboard Bracket: An anonymous reader bought this bracket at an anonymous website for a low price. He installed it on his boat, fired up his outboard, and watched it go into the drink. The bracket has no markings on it, and it is not one of the brands we tested in September of 2007. We are still investigating the origins of this product. In the meantime, we warn readers to stick with one of our recommended brackets from Garhauer, Garelick, or Fulton.

Also with this article...
Darrell Nicholson
Practical Sailor has been independently testing and reporting on sailboats and sailing gear for more than 50 years. Its independent tests are carried out by experienced sailors and marine industry professionals dedicated to providing objective evaluation and reporting about boats, gear, and the skills required to cross oceans. Practical Sailor is edited by Darrell Nicholson, a long-time liveaboard sailor and trans-Pacific cruiser who has been director of Belvoir Media Group's marine division since 2005. He holds a U.S. Coast Guard 100-ton Master license, has logged tens of thousands of miles in three oceans, and has skippered everything from pilot boats to day charter cats. His weekly blog Inside Practical Sailor offers an inside look at current research and gear tests at Practical Sailor, while his award-winning column,"Rhumb Lines," tracks boating trends and reflects upon the sailing life. He sails a Sparkman & Stephens-designed Yankee 30 out of St. Petersburg, Florida. You can reach him at darrellnicholson.com.